State of the Planet

News from the Columbia Climate School

Reactions That Store Carbon Underground Can Cause Cracking. That’s Good News.

reaction before and after
A comparison between the experiment’s original material (left), which was mostly olivine, and the products after reaction with CO2 — mainly of rhombic magnesite crystals and small blobs of silica. Source: Presentation by Catalina Sanchez-Roa

One promising way to remove carbon dioxide from the atmosphere is to pump it underground, where it can react with certain rocks that transform the gas into a solid mineral.

Scientists still have many questions to answer before this practice could be implemented on a large scale. One question is about what happens as the carbon mineralization process evolves — do the newly formed minerals clog the pores in the rock and prevent more CO2 from entering? Or do the additional minerals cause the surrounding rock to crack, opening up new areas where more CO2 can enter, react, and get stored?

New laboratory results, presented at the fall meeting of the American Geophysical Union on Monday, may have cracked the case. They suggest that while there is quite a bit of clogging over time, cracks also form, which can keep the reactions going in a self-sustaining loop. The research, which has not yet been published, was presented by lead author Catalina Sanchez-Roa, an associate research scientist at Columbia University’s Lamont-Doherty Earth Observatory.

“Carbon capture and storage is the only technology so far that can reduce atmospheric CO2 concentrations that are leading to climate change,” said Sanchez-Roa during a pre-recorded presentation. “We are interested in carbon mineralization because it is one of the most secure ways of storing carbon,” she added, and because it capitalizes on naturally occurring processes.

Sanchez-Roa and her colleagues started with a sample of dunite — a type of rock from the Earth’s mantle that can bond with CO2 to form solid carbonate minerals. The team ground up the dunite into a powder and pressed it together, forming a tube-shaped sample. Then they put the tube into a machine called a triaxial deformation apparatus, which simulates the temperature and pressure conditions that might be found underground in the real rock reservoirs that are being eyed for carbon storage. The machine also has a variety of sensors that measured how the properties of the rock material changed as the researchers repeatedly injected it with CO2 over a period of 35 days.

triaxial deformation apparatus in lab
The triaxial deformation apparatus, which simulates conditions underground and measures a sample’s response to CO2 injection. Source: Presentation by Catalina Sanchez-Roa

They found that the sample’s density increased over time, and its permeability decreased. This implies that some clogging took place while the carbon dioxide transformed into magnesite, quartz, silica, and elemental carbon.

The machine also measured several unexpected acoustic emissions which, combined with other measurements such as decreases in pore pressure and increases in volume, indicated that cracks were forming within the sample. The cracks seemed to help the permeability to remain low but steady, as opposed to continuously decreasing as it had earlier in the experiment.

The researchers note in their abstract that this is the first experimental evidence documenting cracking during the carbon mineralization process, and that the cracking helps to maintain permeability. They write: “These results confirm that the carbon mineralization process can be self-perpetuating through reaction-driven cracking (at least at the local scale), a process that is fundamental to upscaling engineered carbon mineralization as an efficient, and safe method for CO2 storage.”

Next, they hope to continue the experiments in rocks that are intact, and to explore which temperature and pressure conditions are best for encouraging cracking.

Sanchez-Roa’s co-authors include Ah-Hyung Alissa Park and Marc Spiegelman of Columbia University, and Jacob Tielke, Christine McCarthy, and Peter Kelemen of Columbia’s Lamont-Doherty Earth Observatory.

Subscribe
Notify of
guest

2 Comments
Oldest
Newest
Inline Feedbacks
View all comments
SidA
SidA
2 years ago

Or does it “crack” and allow the CO2 to escape?

Kim Libera
Kim Libera
2 years ago

This technology has surfaced this year under the general topic of carbon sequestration. Yes co2 can be stored to a certain degree, albeit the engineering is not simple. It can also be secured from concrete manufacture via a new process & turned into synthetic limestone & it can be secured via direct or indirect capture at power plants & then compressed & brought to a storage site. Now it can be kept in a tank if such gas is used say in the chemical industry to make something. Or it can be transported back to the same oil fields from whence they came. Now that does involve a transport cost & geological apparati would hav.e to be used to locate underground the reservoir rocks & the caprocks. The processes for direct or indirect capture at the vent of a power plant is not overly complicated. This process would be comparable to scrubbers capturing the components & turning them into gypsum sheetrock which of course has regular use in the building industry. Energy industries can also sell these by-products on the open market. E.g. quartz of course has wide uses in glass manufacture but also because of its piezo-electric properties it is needed for chip manufacture & timepiece manufacture. I have lobbied my local reps this technological innovation but it is very hard to move them to solutions like this.